Rocketboost™ Wireless
Sender/Receiver
RF-RBUSB
User Guide
Contents
Introduction ........................................................................................ 3
Important safety instructions ....................................................... 5
Features................................................................................................. 8
Setting up your wireless sender/receiver ...............................14
Using your wireless sender/receiver.........................................20
Expanding your Rocketboost System ......................................25
Maintaining your system ..............................................................27
Troubleshooting ..............................................................................27
Specifications....................................................................................29
Legal notices .....................................................................................30
One-year limited warranty...........................................................33
Introduction
Congratulations on your purchase of the Rocketboost™ Wireless
sender/receiver. This product represents the state of the art in 2.4 GHz
wireless audio design. When used with other Rocketboost products you
can enjoy your music throughout your house without the limitations of
cables.
The Rocketboost Wireless sender/receiver can be use as both a sender
and a receiver. As a sender you can connect it to your audio source
devices (like home theater, mp3 player, or computer) and then receive
that audio using any other Rocketboost receiver. As a receiver you can
connect it your stereo system or amplified speakers and then listen to
the audio from any other Rocketboost sender. By using other
Rocketboost wireless audio products, you can also configure multiple
audio streams and listen to any of those audio streams at any
Rocketboost receiver device.
3
RF-RBUSB
With a maximum 150-foot broadcast range, this powerful wireless
device transmits through walls, floors, and ceilings. The audio signal is
uncompressed digital audio so your audio is the highest quality and is
free from interference.
This User Guide explains how to correctly install, operate, and get the
best performance from your Rocketboost Wireless sender/receiver.
Read this guide carefully before installing your system, and then keep it
handy for quick reference.
Package contents
The box should contain the following:
3.5 mm to RCA adapter
cable (6 in, 0.15 m)
Wireless
sender/receiver
AC power adapter
3.5 mm audio cable
Remote control
USB cable
User Guide
Quick Setup Guide
4
Important safety instructions
The lightning flash with arrowhead symbol,
within an equilateral triangle is intended to
alert the user to the presence of
uninsulated "dangerous voltage" within
the product's enclosure that may be of
sufficient magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK:
DO NOT REMOVE SCREWS, COVERS OR THE CABINET.
NO USER SERVICING PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
1
2
3
4
5
6
7
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with a dry cloth.
Do not block any ventilation openings. Install in accordance with
the manufacturer's instructions.
Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
8
5
RF-RBUSB
9
Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with one
wider than the other. A grounding type plug has two blades and a
third grounding prong. The wide blade or the third prong are
provided for your safety. If the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete outlet.
10 Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point where
they exit from the apparatus.
11 Only use attachments/accessories specified by the manufacturer.
12 Unplug this apparatus during lightning storms or when unused for
long periods of time.
13 Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way, such
as power-supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has
been dropped.
14 To reduce the risk of fire or electric shock, do not expose this device
to rain, moisture, dripping, or splashing, and no objects filled with
liquids, such as vases, shall be placed on it.
15 The wall plug is the disconnecting device. The plug must remain
readily operable.
16 Batteries should not be exposed to excessive heat such as sunlight,
fire, or the like.
Caution: Danger of explosion if battery is incorrectly replaced. Replace
only with the same or equivalent type.
Warning: Read the Rating Label on the bottom of the unit for power
input and other safety information.
Caution - Proper Installation
Install the system in a place which is level, dry and neither too hot nor
too cold. The appropriate temperature is between 5° C and 35° C.
Install the system in a location with adequate ventilation to prevent
internal heat from building up inside the unit.
Caution - Proper ventilation
To avoid risk of electric shock and fire, and to prevent damage, locate
the apparatus for adequate ventilation.
6
What is Rocketboost?
Rocketboost is expandable wireless digital audio.
•
•
•
Products with Rocketboost technology let you easily expand your
listening experience throughout your home.
Rocketboost does not interfere with other wireless products in your
home.
Rocketboost is uncompressed digital audio compatible with all
audio formats such as Dolby TrueHD, and DTS-HD Master Audio
used with Blu-ray.
When you see the Rocketboost logo on any product, it
has been designed to work with other Rocketboost
products, no matter who manufactures them.
How does Rocketboost work?
Rocketboost technology can connect all audio devices throughout your
home to form a home audio network.
Rocketboost products include “Senders,” which send or transmit audio
streams, and “Receivers,” which receive the audio. This lets you listen to
music from your Sender in other rooms using your Receiver.
7
RF-RBUSB
Rocketboost is expandable. Each Rocketboost Receiver can select the
audio from any Sender in your Rocketboost audio network. The
following shows an example Rocketboost network. You can set up your
network to meet your specific needs.
RF-RBKIT
RF-RBWHP01
Wireless HD Audio Starter Kit
(Rocketboost Wireless
Sender shown)
Wireless Stereo Headphones
(Headphones are Rocketboost
Wireless Receiver, Charging base
is Rocketboost Wireless Sender)
RF-RBWS02
Wireless Outdoor Speaker
(Rocketboost Wireless
Receiver)
RF-RBUSB
Rocketboost Wireless
sender/receiver
We hope you enjoy your new Rocketboost system. Remember that it’s
designed to grow with your home entertainment needs, and that it’s
easy to add a new device to the network as you expand your system.
Features
•
High-Performance Audio - Uncompressed digital CD-quality stereo
sound
•
Strong Wireless Signal - 150 ft. wireless range (maximum, line of
sight), great sound, no static, won't interfere with your other
wireless products, compatible with all Rocketboost products
Easy to use - Easy to set up
Versatile/Easy audio connection options - USB for Computer Audio,
Line Input for other devices like MP3 or CD players.
Expandable - add more Rocketboost products to listen to music
throughout your house
•
•
•
8
Wireless sender/receiver (front panel)
#
1
Feature
Description
Standby indicator Turns red when the wireless sender/receiver is in standby mode.
Power/Join
button
Press to turn the wireless sender/receiver on. Press and hold to initiate joining.
Press again to go to standby mode. When you connect the AC power adapter,
the device turns on automatically.
2
3
4
Power/Join
indicator
Lights blue when the HUB STATUS switch is set to DISABLE.
Lights green when the HUB STATUS switch is set to ENABLE.
The indicator will turn solid when it is joined in a network, if the device is not in
a network, the indicator blinks slowly. When the device is put in joining mode,
the indicator blinks rapidly. See “Establishing communication” on page 21 for
more information.
Sender mode
indicator
Turns blue when sending audio.
Note: This indicator will light automatically when a 3.5 mm connector or a USB
cable is attached to the device (the device senses the cable connection).
9
RF-RBUSB
#
5
Feature
Source
Description
Press to select different audio streams on your Rocketboost network. Each press
moves to the next source.
Receiver mode
indicator
Turns blue when receiving audio from a Rocketboost wireless sender. Blinks
slowly if the current source listened to is muted.
Note: This indicator will not be lit if the Rocketboost wireless sender is turned
off. Press the SOURCE button to find the next available source.
6
Line in indicator Turns blue when an audio source device is plugged into the Line In jack.
7
8
Note: The indicator does not light when a USB cable is connected to the USB
jack.
Remote control Receives the signal from the remote control.
sensor window
10
Wireless Sender/Receiver (back panel)
#
1
Feature
Description
External antenna Receives audio from wireless senders. Sends audio to receivers.
HUB STATUS
switch
Enables and disables hub mode operation. See “Establishing communication”
on page 21 for more information.
2
LINE IN/OUT jacks When used as a wireless sender, plug an audio source device into the LINE IN
jack.
When used as a wireless receiver, plug your amplifier or amplified speakers
into the LINE OUT jack. Note, this device operates as both a wireless sender
and wireless receiver, so you can use it simultaneously to send and receive
audio on your Rocketboost network.
3
USB jack
When used as a wireless sender, connect to the USB jack of your computer to
send the audio from your computer to the Rocketboost wireless receivers.
4
5
DC IN jack
Plug the AC power adapter into this jack.
11
RF-RBUSB
Remote control
USB
In
LINE
In
DEVICE
STREAM
ALL
TM
#
1
Feature
/| Standby/On
button
Description
Press to turn the wireless sender/receiver on. Press again to enter standby
mode.
Skip to the previous track. Play or Pause a track. Skip to the next track.
These playback controls will only work when you connect the wireless
sender/receiver to a computer's USB port. The playback controls will work
for Windows Media® Player and iTunes, but may not work with other
software. When using these controls, point the remote at your
/
/
(Previous, Play/Pause,
Next)
2
Rocketboost wireless receiver where you are listening to the audio stream.
12
#
3
Feature
Description
Press to adjust the volume on Rocketboost devices that support volume
control (for example, RF-RBWS02 wireless outdoor speaker). The wireless
sender/receiver is a line-level device, so volume controls are not supported
on it. In that case the volume on the local amplifier or powered speakers
connected to the wireless sender/receiver must be adjusted when
listening to the wireless sender/receiver line-level out.
Volume
buttons (device)
/
BASS button
Press to enable/disable the BASS enhancement. (This wireless
sender/receiver does not support BASS boost, but the remote control can
be used on other Rocketboost products that do support it.)
4
USB In
Line In
Press to listen to the audio from the device connected to the USB jack of
5
6
7
your wireless sender/receiver.
Press to listen to the audio from the device connected to the LINE In jack
of your wireless sender/receiver.
Press to adjust the volume of all devices receiving the same audio stream.
Volume
buttons (stream)
/
Press to mute all audio streams in your Rocketboost network. Pressing
mute again at any Rocketboost wireless receiver will “unmute” the stream
that was last heard at that wireless receiver. This stream can now be heard
from any other wireless receiver that was receiving that stream. Other
streams are unmuted in the same way: pressing mute again at each
wireless receiver will unmute the stream that was last heard at that
receiver.
(mute - all)
8
9
Next Source button Press to select different audio streams on your Rocketboost network. Each
press moves to the next source.
13
RF-RBUSB
Setting up your wireless sender/receiver
Initial setup
To set up your wireless sender/receiver:
1
2
Unpack the package contents.
Adjust the antennas.
Tip: In some cases, you may improve range by rotating both antennas
to create a 180° angle.
Note: Make sure that the device is located at least 18” (.46 m) from any
WiFi router.
Connecting your wireless sender/receiver
Rocketboost technology can connect all audio devices throughout your
home to form a home audio network.
Rocketboost products include “senders,” which send audio streams, and
“receivers,” which receive the audio. This lets you listen to music from
your wireless sender in other rooms, using your wireless receiver.
14
The Rocketboost Wireless sender/receiver works as both a Rocketboost
wireless sender and wireless receiver, so you can use it in either
configuration. In fact, you can even use it as a wireless sender and
wireless receiver simultaneously.
Rocketboost is expandable. Each Rocketboost wireless receiver can
select the audio from any wireless sender in your Rocketboost audio
network. You can set up your network to meet your specific needs. The
illustration shows an example Rocketboost network.
Wireless Amplified
Audio Receiver
(RF-RBREC)
Wireless Outdoor
Speaker
(RF-RBWS02)
Wireless
sender/receiver
(RF-RBUSB)
Wireless
sender/receiver
(RF-RBUSB)
Wireless Speakers
(RF-RBWS01)
15
RF-RBUSB
Using as a wireless sender
The wireless sender/receiver can be connected to an MP3 player,
computer, or other audio device to send music to other Rocketboost
wireless receivers.
An example configuration is shown below.
or
Wireless
sender/receiver
Wireless receiver
Connect your audio source to the LINE In jack or USB jack on the rear of
the wireless sender/receiver, using the 3.5 mm audio cable or the USB
cable. If necessary, you can also use the 3.5 mm to RCA adapter, if your
audio device uses RCA-type line out connectors.
You can select either USB-In or LINE-In using the remote control,
depending on which audio input you are using.
To audio
output jack
Included 3.5 mm cable
Included 3.5 mm cable and
3.5 mm to RCA adapter
To audio
output jack
Included USB cable
16
Using as a wireless receiver
The wireless sender/receiver can be connected to an amplifier or
amplified speaker to receive music from other Rocketboost wireless
senders.
An example configuration is shown below.
or
RF-RBUSB (Rocketboost
Wireless receiver)
RF-RBUSB (Rocketboost
Wireless sender)
Connect your powered speaker or amplifier to the LINE Out jack on the
rear of the wireless sender/receiver using the 3.5 mm audio cable. If
necessary, you can also use the 3.5 mm to RCA adapter, if your audio
device uses RCA-type line in connectors.
Included 3.5 mm cable
Included 3.5 mm cable and 3.5 mm to RCA adapter
To audio
input jack
17
RF-RBUSB
Connecting power to the wireless sender/receiver
To connect the power:
1
Connect the AC power adapter to the wireless sender/receiver and
plug into an AC power outlet. The wireless sender/receiver
automatically turns on and the power indicator turns green or blue,
depending on the hub status switch position.
Notes:
- Make sure that the AC power outlet matches the wireless
sender/receiver’s AC input (100-240V) before connecting.
- Connect the AC power adapter to an AC power outlet only after all
other connections are completed.
Setting up and using your remote control
To set up and use your remote control:
1
Remove the insulation sheet in the battery tray before using the
remote control for the first time.
18
2
Aim the remote control at the IR sensor on the front from a
maximum distance of 23 ft. (7 m) away and a maximum angle of +/-
30 degrees from the center line.
To replace the battery:
1
Press the battery tray lock to the right, then slide out the battery
tray. You can remove the battery door with your fingernails by using
the spaces set back in the remote control.
19
RF-RBUSB
2
Match the polarity on the battery with a plus sign (+) on the battery
tray.
Replace the battery with a CR2025 or equivalent.
Slide the tray with the new battery into the battery compartment
until it clicks into place.
3
Warnings:
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type of battery.
Notes:
Remove the battery from the remote control when it is not to be used for a long
period. Otherwise it might be damaged due to battery leakage.
Do not drop or jar the remote control.
Do not spill water or any liquid on the remote control.
Do not place the remote control on a wet object.
Do not place the remote control under direct sunlight or near sources of excessive
heat.
Using your wireless sender/receiver
Turning on your wireless sender/receiver
To turn the wireless sender/receiver on and off:
1
When initially connecting to an AC outlet, the device automatically
turns on. To turn off the device, press . The power indicator turns
off and the standby indicator turns red.
2
If the wireless sender/receiver is off, press
to turn it on. The
power indicator lights.
20
Establishing communication
Rocketboost products form an audio network and each Rocketboost
wireless receiver can select the audio from any Rocketboost wireless
sender in the network.
Important
Every Rocketboost network must contain one hub device, which helps
devices join the network. The network can have only one hub, which
you can enable using the hub switch on the back of all Rocketboost
wireless senders and the wireless sender/receiver.
If this is your first Rocketboost product, you should make the wireless
sender/receiver the hub, if you already have Rocketboost products, you
should disable hub mode on this device.
Important: Hub devices must always have power for your network to
operate. The hub device can be in standby (power saving) mode, but
must stay plugged in.
All Rocketboost devices must be “joined” or wirelessly connected to
your Rocketboost hub device so that audio can be sent between them.
The following steps describe how to join Rocketboost devices.
To establish communications:
1
2
3
If you are setting up your network for the first time, choose one of
your Rocketboost wireless senders to be your hub device by setting
the Hub Status switch to Enable. For example, if you want this wireless
sender/receiver to be the hub, set the Hub Status switch on the
wireless sender/receiver to Enable.
If you already have a Rocketboost network established, set the Hub
Status switch on this wireless sender/receiver to Disable.
The wireless sender/receiver power indicator lights green if the
wireless sender/receiver Hub Status switch is enabled, or lights blue if
the wireless sender/receiver Hub Status switch is disabled.
If possible, bring your Rocketboost hub device, and the new
Rocketboost device to which you’d like to join to the hub, into the
same room.
4
5
Press the
Press the
on the Rocketboost hub device to turn it on.
on your other Rocketboost device to turn it on.
21
RF-RBUSB
6
Press and hold the
on the Rocketboost hub device for more
than three seconds to put it into joining mode. The power indicator
starts blinking rapidly and the unit will stay in joining mode for 30
seconds. The diagram (below) shows an example of this. In this
example, the wireless sender/receiver is the hub device.
Power on
indicator
7
Press and hold the
on your other Rocketboost device for more
than three seconds to put it into joining mode.
•
•
When successfully joined, the power indicator LEDs on both
products will stop blinking and stay on.
If joining fails after 30 seconds, the power indicator LEDs will
begin flashing at a slower rate. If this occurs, repeat the above
steps.
•
Repeat steps 2-7 for each additional Rocketboost device you
are adding to your network.
Using your wireless sender/receiver as a sender
Note: When using the wireless sender/receiver as a sender, the Sender
mode indicator LED will light when you are correctly connected to an
audio source.
To use your wireless sender/receiver as a sender:
1
Turn on the audio source connected to the wireless
sender/receiver. Make sure the volume of the audio source is
turned up and not muted, otherwise no audio will be sent over the
Rocketboost network.
2
Select either USB-In or LINE-In using the remote control, depending
on which audio input you are using.
22
3
4
Play music from the audio device connected to your wireless
sender/receiver.
Adjust the volume on your Rocketboost wireless receiver.
Using your wireless sender/receiver as a receiver
Note: When using the wireless sender/receiver as a receiver, the Receive
mode indicator LED will light when you are receiving an audio source
from the Rocketboost network.
To use your wireless sender/receiver as a receiver:
1
Turn on the audio source connected to the Rocketboost wireless
sender. Make sure the volume of the audio source is turned up and
not muted, otherwise no audio will be sent over the Rocketboost
network.
2
Play music from the audio device connected to your Rocketboost
wireless sender.
If you have multiple audio sources in your Rocketboost network,
press the Source button on the Rocketboost wireless receiver to
hear the next audio source. Press the Source button again to cycle
through all available audio sources.
Controlling the device volume
When the wireless sender/receiver is used as a wireless receiver, the
output volume is adjusted at the amplifier or powered speakers
connected to the wireless receiver. The wireless sender/receiver remote
control device volume controls can be used with other Rocketboost
wireless devices that support volume (for example RF-RBWS02 wireless
outdoor speaker).
23
RF-RBUSB
Muting all devices
Rocketboost also features a global mute feature that instantly silences
all audio streams in the network.
To mute all devices in the network:
1
Press ALL (mute) on the remote control. All audio streams in your
network are muted.
USB
In
LINE
In
DEVICE
STREAM
ALL
TM
2
Pressing ALL (mute), while aiming at a specific Rocketboost wireless
receiver, will “unmute” the stream that was last heard at that
wireless receiver. This stream can now be heard from any other
wireless receiver that was receiving that stream. Other streams are
unmuted in the same way: pressing ALL (mute) again at each
wireless receiver will unmute the stream that was last heard at that
wireless receiver.
Turning off the system
To turn off the system:
•
Press on the wireless sender/receiver to turn off the unit.
•
•
The power indicator turns off and the standby indicator lights
red.
Remove the AC power adapter from the AC power outlet to
power off the device completely.
Notes:
- If there are other wireless senders and wireless receivers in the
network, you must keep your Hub powered on. The hub can be in
standby, but it needs to be connected to the AC adapter.
24
- The device has its own memory. After the wireless sender/receiver and
other Rocketboost devices are joined, they will remember each other
and join automatically when they are powered on again.
To stop sending audio from the wireless sender/receiver:
•
Remove the 3.5 mm plug and the USB connector from the back of
the device and the wireless sender/receiver will automatically stop
sending. The Sender mode indicator will go out.
Expanding your Rocketboost System
Rocketboost technology is expandable. Each Rocketboost wireless
receiver can select the audio from any wireless sender in your
Rocketboost audio network. The following shows an example
Rocketboost network. You can set up your network to meet your
specific needs.
RF-RBKIT
RF-RBWHP01
Wireless Stereo Headphones
(Headphones are Rocketboost
Wireless Receiver, Charging base
is Rocketboost Wireless Sender)
Wireless HD Audio Starter Kit
(Rocketboost Wireless
Sender shown)
RF-RBWS02
Wireless Outdoor Speaker
(Rocketboost Wireless
Receiver)
RF-RBUSB
Rocketboost wireless
sender/receiver
•
The Rocketboost Wireless Outdoor Speaker (RF-RBWS02)
includes a wireless outdoor speaker and the wireless
sender/receiver (RF-RBAUX). Audio sources connected to the
wireless sender/receiver can be listened to using the wireless
speaker.
25
RF-RBUSB
•
•
The Rocketboost Wireless Speaker (RF-RBWS01) includes a
wireless speaker and a wireless sender/receiver (RF-RBUSB). Audio
sources connected to the wireless sender/receiver can be listened
to using the wireless speaker.
The Rocketboost Wireless sender/receiver (RF-RBUSB) can be
used as both a wireless sender and a wireless receiver. As a wireless
sender you can connect it to your other audio source devices (like
home theater, MP3 player, or even a computer) and then receive
that audio using your indoor wireless speaker or any other
Rocketboost wireless receiver. As a wireless receiver you can
connect it your stereo system or amplified speakers and then listen
to the audio from any other Rocketboost wireless sender.
The Rocketboost Amplified Audio Receiver (RF-RBREC) is an
amplified wireless receiver. You connect speakers to this and then
listen to audio from any of your Rocketboost wireless sender
devices. This is a great way to expand your Rocketboost system to
listen to your music anywhere in the house.
•
•
•
The Rocketboost Wireless HD Starter Kit (RF-RBKIT) includes a
wireless sender device and the RF-RBREC, wireless amplified
receiver. This product can be used for home theater wireless
surround sound of for multi-room audio.
The Rocketboost Wireless Headphones (RF-RBWHP01) include a
wireless sender device and wireless headphones. Audio sources
connected to the wireless sender can be listened to using the
wireless headphones.
For more information, and to see what other Rocketboost products are
Rocketboost Network Capabilities
The maximum number of Rocketboost devices in a Rocketboost
Network is 9. If you already have 9 devices and attempt to join another
one, then joining will fail for the new device.
Note: If you want to remove a device from your Rocketboost network
you need to rejoin it to a different hub device (this basically creates a
2nd Rocketboost network).
The maximum number of audio streams that can be sent
simultaneously on the Rocketboost network is:
•
•
5 stereo CD quality -or-
1 stereo HD quality + 3 CD quality -or-
26
•
•
2 stereo HD quality + 2 stereo CD quality -or-
3 stereo HD quality
Note: HD streams are available if using the Rocketboost Wireless HD
Audio Starter Kit wireless sender. If your system is in a maximum audio
stream state, then the Send mode indicator will not light on the
wireless sender devices that have exceeded the maximum. To use those
device's audio streams, you need to turn off one of your other wireless
senders.
Maintaining your system
Use a soft cloth dampened with a weak solution of mild detergent and
water. Dry the device immediately afterwards with a clean cloth. Do not
use abrasive cloth, thinners, alcohol, or other chemical solvents, because
they may damage the finish or remove the panel lettering.
Cautions:
Do not block the ventilation openings.
If the power cord is damaged, it must be repaired by a qualified
technician.
Troubleshooting
Check this information for a possible solution before calling for
assistance.
General troubleshooting
•
Every Rocketboost network must contain only one hub device,
which helps other Rocketboost wireless devices join the network.
•
You can turn any Rocketboost wireless sender or wireless
sender/receiver into a hub by using the HUB STATUS or HUB ENABLE
switch on the back of the device. The network can only have
one hub.
•
•
The hub device must have power for the audio network to
operate. The hub can be in standby (power-saving mode), but
must remain plugged in.
The existing hub device will be the device with the green
power indicator.
•
The unobstructed operating range of a Rocketboost network is 150
feet (45 meters).
27
RF-RBUSB
•
Each network must contain both a wireless sender device and a
wireless receiver device. Do you have both a wireless sender and a
wireless receiver device?
Problem
Solution
No communication
between the
Rocketboost sender and
receiver devices.
• Make sure that the power indicators of the Rocketboost wireless sender and
“Establishing communication” on page 21.
• If the joining process is failing, make sure that only one of your Rocketboost
wireless devices has the Hub switch enabled. Note that the hub device will
be the only device with the green power indicator. Non-hub devices have a
blue power indicator.
No sound
• Check the volume level of the audio sources connected to the wireless
sender.
• Make sure that all of the audio cables are connected correctly.
• Make sure that the power indicators of the Rocketboost wireless sender and
wireless receiver devices are lit solidly. If the indicators are blinking, see
“Establishing communication” on page 21.
• Make sure the audio source connected to your wireless sender is On.
• Make sure the wireless sender or wireless receiver devices are not Muted.
The Receive mode indicator light blinks when the device is muted.
• When using computer USB audio, make sure your computer audio volume is
turned up and not muted. Depending on your computer and operating
system you may have to adjust this in the operating system volume settings
or in the application you are using (for example, Windows Media Player).
My Rocketboost remote • Make sure you have removed the insulation sheet in the battery tray of the
will not control the Rocketboost remote.
volume. I can’t turn the • To maximize your volume level through the system, make sure your source
volume up or down.
devices (i.e., A/V receiver, MP3 player, etc.) have their volume turned up to at
least 50% of their volume level.
• The battery in your remote may be dead. Try replacing it with a new battery.
• Rocketboost remote volume controls are not supported by the RF-RBUSB
wireless sender/receiver, since it uses a line-level output. The volume can be
controlled at the amplifier or powered speaker connected to the wireless
sender/receiver.
28
Problem
Solution
The sound/audio is
really quiet coming out
of my speakers.
• To maximize your volume level through the system, make sure your source
devices (i.e., A/V receiver, MP3 player, etc.) have their volume turned up to at
least 50% of their volume level.
Sound interference
• Experiment with different orientations or locations of your wireless sender
device.
• Make sure your wireless sender device is more than 18 inches from any WiFi
routers you may have.
• Shorten the distance between the Rocketboost wireless devices. The
maximum distance is 150 feet (45 m), but this distance will be reduced as
the wireless signal passes through walls or other obstructions.
• It is possible other devices like cordless phones, microwaves, wireless
routers, etc. may be causing interference. Try turning one device off at a time
to determine which device is causing interference.
• If your cordless phone or wireless router is causing interference try changing
the channel it is using. Please refer to your device’s owner manual.
Cannot play audio from • Make sure that the USB cable is connected to the wireless sender/receiver
a computer
and your computer correctly.
• Make sure that you have selected the USB jack as the audio input source by
pressing USB-In button on the remote control.
Specifications
Wireless sender/receiver
5 V, 600 mA
2.0 Vrms
Power supply
Maximum line-level input
signal level
1.0 Vrms
Maximum line-level output
signal level
10 kohm
90 dB
Output loading
Signal-to-noise ratio
29
RF-RBUSB
9.1 × 3.4 × 1.8 inches
(230 × 86 × 46 mm)
Dimensions (H × D × W)
Weight
4.7 oz. (134 g)
Legal notices
FCC and IC Information:
This device complies with Part 15 of the FCC Rules and RSS-210 of the IC
Rules. This device complies with Industry Canada license-exempt RSS
standard(s). Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may
cause undesired operation.
Warning: Changes or modifications to this unit not expressly approved
by the party responsible for compliance could void the user's authority
to operate the equipment.
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
30
FCC & IC Radiation Exposure Statement
This equipment complies with FCC/IC radiation exposure limits set forth
for an uncontrolled environment and meets the exemption from the
routine evaluation limits in section 2.5 of RSS 102.
1. This Transmitter must not be co-located or operating in conjunction
with any other antenna or transmitter.
2. This equipment complies with FCC RF/IC radiation exposure limits set
forth for an uncontrolled environment. This equipment should be
installed and operated with a minimum distance of 20 centimeters
between the radiator and your body.
The device meets the exemption from the routine evaluation limits in
section 2.5 of RSS 102 and users can obtain Canadian information on RF
exposure and compliance from the Canadian Representative Richardson
Technical Services Inc., Suite 304, 131 Wurtemburg St., Ottawa, Ontario,
Canada. Tel: 613 562 3827
Rocketboost is a trademark of BBY Solutions, Inc.
Information for Users on Disposal of Old Equipment
European Union
Note: This symbol is only valid in the European Union.
This symbol indicates that the electrical and electronic
equipment should not be disposed as general household
waste at its end-of-life. Instead, the product should be
handed over to the applicable collection point for the
recycling in accordance with your national legislation.
By disposing of this product correctly, you will help to
conserve natural resources and will help prevent potential
negative effects on the environment and human health that could
otherwise be caused by inappropriate waste handling of this product.
For more information about collection point and recycling of this
product, please contact your local municipal office, your household
waste disposal service or the shop where you purchased the product.
Penalties may be applicable for incorrect disposal of this waste, in
accordance with national legislation.
31
RF-RBUSB
Other Countries Outside the European Union
If you wish to dispose of this product, please do so in accordance with
applicable national legislation or other rules in your country for the
treatment of old electrical and electronic equipment.
32
One-year limited warranty
Rocketfish Products (“Rocketfish”) warrants to you, the original purchaser of this new RF-RBUSB (“Product”), that the
Product shall be free of defects in the original manufacture of the material or workmanship for one (1) year from the
purchase of the Product (“Warranty Period”). This Product must be purchased from an authorized dealer of Rocketfish
brand products and packaged with this warranty statement. This warranty does not cover refurbished Product. If you notify
Rocketfish during the Warranty Period of a defect covered by this warranty that requires service, terms of this warranty
apply.
How long does the coverage last?
The Warranty Period lasts for one year (365 days), beginning on the date you purchased the Product. The purchase date is
printed on the receipt you received with the product.
What does this warranty cover?
During the Warranty Period, if the original manufacture of the material or workmanship of the Product is determined to be
defective by an authorized Rocketfish repair center or store personnel, Rocketfish will (at its sole option): (1) repair the
Product with new or rebuilt parts; or (2) replace the Product at no charge with new or rebuilt comparable products or parts.
Products and parts replaced under this warranty become the property of Rocketfish and are not returned to you. If service
of Products and parts are required after the Warranty Period expires, you must pay all labor and parts charges. This
warranty lasts as long as you own your Rocketfish Product during the Warranty Period. Warranty coverage terminates if
you sell or otherwise transfer the Product.
How to obtain warranty service?
If you purchased the Product at a retail store location, take your original receipt and the Product to the store you purchased
it from. Make sure that you place the Product in its original packaging or packaging that provides the same amount of
protection as the original packaging. If you purchased the Product from an online web site, mail your original receipt and
the Product to the address listed on the web site. Make sure that you put the Product in its original packaging or packaging
that provides the same amount of protection as the original packaging.
Where is the warranty valid?
This warranty is valid only to the original purchaser of the Product in the United States, Canada, and Mexico.
What does the warranty not cover?
This warranty does not cover:
•
•
•
•
•
•
•
•
•
•
•
Customer instruction
Installation
Set up adjustments
Cosmetic damage
Damage due to acts of God, such as lightning strikes
Accident
Misuse
Abuse
Negligence
Commercial use
Modification of any part of the Product, including the antenna
33
RF-RBUSB
This warranty also does not cover:
•
•
•
•
•
•
Damage due to incorrect operation or maintenance
Connection to an incorrect voltage supply
Attempted repair by anyone other than a facility authorized by Rocketfish to service the Product
Products sold as is or with all faults
Consumables, such as fuses or batteries
Products where the factory applied serial number has been altered or removed
REPAIR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS YOUR EXCLUSIVE REMEDY. ROCKETFISH SHALL NOT BE
LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR THE BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON
THIS PRODUCT, INCLUDING, BUT NOT LIMITED TO, LOST DATA, LOSS OF USE OF YOUR PRODUCT, LOST BUSINESS OR LOST
PROFITS. ROCKETFISH PRODUCTS MAKES NO OTHER EXPRESS WARRANTIES WITH RESPECT TO THE PRODUCT, ALL EXPRESS
AND IMPLIED WARRANTIES FOR THE PRODUCT, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF AND
CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE
WARRANTY PERIOD SET FORTH ABOVE AND NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, WILL APPLY AFTER THE
WARRANTY PERIOD. SOME STATES, PROVINCES AND JURISDICTIONS DO NOT ALLOW LIMITATIONS ON HOW LONG AN
IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC
LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE OR PROVINCE TO PROVINCE.
Contact Rocketfish:
For customer service please call 1-800-620-2790
Distributed by Best Buy Purchasing, LLC
7601 Penn Avenue South, Richfield, Minnesota, U.S.A. 55423-3645
© 2011 BBY Solutions, Inc.
All rights reserved. ROCKETFISH is a trademark of BBY Solutions, Inc. Registered in some countries. All other products and
brand names are trademarks of their respective owners.
For model number RF-RBUSB-05A:
Distributed by: Best Buy Europe Distributions Limited. 1 Portal Way, London W3 6RS
Freephone number for Rocketfish products: 0800 389 1120
34
(800) 620-2790
Distributed by Best Buy Purchasing, LLC
7601 Penn Avenue South, Richfield, MN 55423-3645 USA
© 2011 BBY Solutions, Inc.
All rights reserved. ROCKETFISH is a trademark of BBY Solutions, Inc.
All other products and brand names are trademarks of their respective owners.
For model number RF-RBUSB-05A:
Distributed by: Best Buy Europe Distributions Limited. 1 Portal Way, London W3
6RS
Freephone number for Rocketfish products: 0800 389 1120
11-0204
ENGLISH
|
Q Logic TV Video Accessories 59238 02 A User Guide
Radica Games Video Games 9834 User Guide
RCA Digital Camera LDK 4700 User Guide
RCA Radio Antenna ANT3038XR User Guide
Rhino Mounts Lawn Mower FN14 User Guide
Rotel Stereo System RX 880 User Guide
Samsung Computer Drive BG68 01525A User Guide
Sanyo Battery Charger KR 600AE User Guide
Sanyo Cell Phone RL2500 User Guide
Sanyo Heat Pump APR CHP680BA User Guide